TASKING VX-toolset for C166/ST10

来源：未知发布日期：2015-07-20浏览次数：次

IDE updated with Eclipse platform v3.3 and CDT v4.0
Much faster and easier selection of a microcontroller in IDE
Support for custom makefiles using the External builder
Internal builder allows parallel build processes for faster compilation
Introduction of MIL linking, allowing application wide checks and optimizations
Static profiling to help detect critical paths in an application
Support for the new Infineon XE166 series (XE164F, XE164G, XE164H, XE164K, XE167F, XE167G, XE167H and XE167K)
Support for new derivatives in the Infineon XC2000 family (XC2264, XC2267, XC2285, XC2286, XC2365, XC2387, XC2766X and XC2786X)
Added support for STMicroelectronics ST10F168 and ST10F269
Debugger support for:
- EasyKit boards for XE164F and XE167E
- Easykit boards for XC2267, XC2365, XC2387, XC2766X and XC2786X
Includes Infineon's DAS v2.6.3 (LPT v2.4.0) to support the new Infineon boards and Wigglers
Many other improvements

For an overview of all changes in the latest revision of the VX-toolset, read the Release Note.

Integrated Development Environment based on Eclipse, enabling extensibility though plug-ins from third parties (e.g. for RTOS configuration or debugging)
Includes C, C++/EC++ compilers with MISRA C enhanced code checking
- Conforms (default) to ISO/IEC 9899:1999(E), as well as ANSI-C X3.159-1989; C++ compatible with ISO/IEC 14882:1998(E)
- MISRA C guidelines supported: MISRA-C:1998 and MISRA-C:2004
C/C++ libraries, run-time libraries, floating-point libraries provided in source code
Powerful assembler and linker/locator, using a versatile linker-script-language
Project set up wizard to help you to configure a new project
Conversion utilities for easy project migration from classic TASKING C166/ST10 toolset
Integrated support for programming Flash memory
Toolset generates ELF/DWARF 3.0 output for tool interoperability
The toolset supports all C166 and ST10 derivatives, such as:
Infineon Technologies: C16x, XC16x, XE164, XE167, XC22xx, XC23xx, XC27xx, E-Gold, as well as all their individual variants
IPextreme: C166S V1 core
STMicroelectronics: ST10x168, ST10x251, ST10x252, ST10x269, ST10x271, ST10x272, ST10x273, ST10x275, ST10x276, ST10x296, Super10 core, as well as all their individual variants
Micronas: SDA6000
The TASKING C166/ST10 tools are acknowledged as the best in the market, having been the de facto standard worldwide for more than 15 years. With a market share of more than 90% in automotive, prominent OEM and Tier-1 companies rely on the quality of the TASKING tools

Three debugger engines are available for debugging in C++, C and assembly: Simulator, On-Chip (OCDS) and ROM monitor debugger
Seamless integration of the debugger into the Eclipse IDE
Simulator debugger is included with all product bundles
Wizard to help you configure your project to run on an evaluation board
On-Chip debugging is supported through a USB-JTAG adapter or a simple parallel cable for Infineon evaluation boards. The USB-JTAG adapter is often provided with Infineon starter kits and also available from Altium
For OCDS the TASKING debugger makes use of Infineon’s Device Access Server (DAS), which is provided with the toolset. DAS allows remote debugging over a TCP/IP network
The ROM monitor debugger is plug-and-play ready for many evaluation boards, and retargetable to your own hardware
ROM monitor debugging via serial port, and through TCP/IP over a remote PC
OSEK kernel-aware debugging, ORTI 2.0 and 2.1 based

RTOS:
See the VX-toolset for C166 RTOS partners page.
In-Circuit Emulator / JTAG Interface / Debugger Solutions:
Hitex Development Tools, Infineon Technologies, Lauterbach, pls
Evaluation boards:
FS FORTH-SYSTEME (Digi International), Infineon Technologies, Phytec, STMicroelectronics, TKtronic, TQ-Components
Communication protocols:
port GmbH, CMX
Consultancy and/or training:
Altium Professional Services
Software Design and Test Tools
HCC-Embedded, LDRA, Razorcat